This calculation is rounded up to nearest yard and includes a recommended 10% waste factor. Installers should be aware of pattern, width, and match before submitting final figures.
maximum estimate output size should be:
---
at 300dpi
*Actual output may vary depending on image content, quality and clarity. Please contact your MDC Studio representative to confirm calculations.
OR
0
yards
This calculation is an approximation. Review installation instructions and verify dimensions before submitting final figures. Please review product detail pages to confirm panel size is available for desired pattern.
OR
0kits
Base
Effect
Calculations are based on estimated maximum coverage rates. Actual rates may vary depending on substrate and installer.
We've got you covered. Enter your space dimensions below to calculate your project needs.
OR
0
linear yards
This calculation is rounded up to nearest yard and includes a recommended 10% waste factor. Installers should be aware of pattern, width, and match before submitting final figures.
Anodized Silver